Visit us at KRYO 2024 from September 22 to 24 in Bad Herrenalb, Germany.

Visit us at LTD20 from July 23 to 28 in Deajon, South Korea.

Read the case study on the development of ULCA-1 variants within the EMPIR e-SI-Amp project.

We will be presenting our latest products at CPEM2018 in Paris from July 8 to 13, 2018. 

We are looking forward to meet you at booth #07.

There are new versions of our SQUID electronics control software available. Download SQUIDViewer v3.3.18 and the SQUIDViewer DLL v0.0.0.11 from the customer area.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

The ultrastable low-noise current amplifier ULCA-1 (licensed by PTB) is now available.

Find out more here.

Find the latest publication about low-noise two-stage read out of nanoSQUIDs with bias reversal option by use of a combined XXF-1/SEL-1 SQUID electronics system in our references section.

There is a new version of our SQUID electronics control software available. Download SQUIDViewer v3.3.16 from the customer area.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

Magnicon has moved to larger premises. Our new address is

Magnicon GmbH
Barkhausenweg 11
22339 Hamburg
Germany

Our phone, fax, and online contacts have not changed.

There is a new version of our SQUID electronics control software available. Download SQUIDViewer v3.3.11 from the customer area.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

You can download an updated version of the magsv.dll dynamic link library from the customer area.

A bug is removed, causing problems with the switch settings for CSE-2 current source boards.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

There is a new version of our SQUID electronics control software available. Download SQUIDViewer v3.3.10 from the customer area.

An update of the magsv.dll dynamik link library to v0.0.0.7 is available too.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

Please visit our References site to learn more about the latest applications of our customers.

There is a new version of our SQUID electronics control software available. Download SQUIDViewer v3.3.8 from the customer area.

An update of the magsv.dll dynamik link library to v0.0.0.4 is available too as well as a TempViewer v1.2.1 update.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

The Superconductivity Centennial Conference (EUCAS, ISEC, ICMC) will be held at the World Forum in The Hague, The Netherlands from September 18-23, 2011.

We are looking forward to meet you at booth #28.

The 14th international workshop on Low Temperature Detectors will be held at Heidelberg University from August 1-5, 2011.

We are looking forward to meet you at our booth.

With the new magsv.dll dynamic link library, you can integrate SEL-1 and XXF-1 electronics control into your software development system in a convenient way.

Use more than 40 functions to set and read nearly all electronics parameters. Customers can download the latest magsv.dll with all necessary support files from our customer area.

There are new versions of SQUIDViewer v3.3.5 and TempViewer v1.2.0 available too.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

Magnicon is proud to announce some new activities in the field of high-precision metrology applications. Some devices are developed together with Physikalisch Technische Bundesanstalt (PTB), the German national metrology institute. Please contact us for more informations about prices and availability.

CCC Electronics
A new state-of-the-art electronics for Cryogenic Current Comparator (CCC) operation for high precision resistance measurements is under development right now. The 19" plug-in chassis includes two digital current sources, a nanovoltmeter acting as a null-detector, and a communication unit for PC control of all parameters. Together with our high-performance XXF-1 SQUID electronics the system allows fast and stable measurements with lowest uncertainty.

More informations can be found at:
Improving the stability of cryogenic current comparator setups
D Drung, M Götz, E Pesel, J-H Storm, C Aßmann, M Peters and Th Schurig
Supercond. Sci. Technol. 22 (2009) 114004
Improved Cryogenic Current Comparator Setup With Digital Current Sources
Goetz, M.; Drung, D.; Pesel, E.; Barthelmess, H.-J.; Hinnrichs, C.; Assmann, C.; Peters, M.; Scherer, H.; Schumacher, B.; Schurig, T.
IEEE Trans. Instr. and Meas., Volume 58,  Issue 4,  April 2009 Page(s):1176 - 1182

Nanovoltmeter
Resulting from our CCC electronics development we will offer the applied nanovoltmeter as a stand-alone device too. In comparison to available nanovoltmeters, this new chopper amplifier offers high bandwidth with short settling time and low voltage noise as well as low current noise performance.

More informations can be found at:
Ultra-low Noise Chopper Amplifier with Low Input Charge Injection
Dietmar Drung and Jan-Hendrik Storm
Paper P1237 at CPEM 2010, IEEE Trans. Instr. and Measurement, Vol. 60, Issue 7, pp. 2347-2352 (2011)

Voltage Ramp Generator
Together with PTB we have developed a highly linear digital voltage ramp generator that can be used for traceable calibration of picoamperemeters. The fully computer controlled device allows voltage slopes between 1mV/s and 1000mV/s with ultra low variations.

More informations can be found at:
Novel Digital Voltage Ramp Generator for Use in Precision Current Sources in the Picoampere Range
Willenberg, G.-D. Tauscher, H.N.
IEEE Trans. Instr. and Measurement, Volume 58, Issue 4, pp. 756-760 (2009)

There is a new version of our SQUID electronics control software available. Download SQUIDViewer v3.3.2 from the customer area.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

Magnicon GbR is now Magnicon GmbH. Our other contact informations have not changed.

It was a pleasure to meet you in Dresden. Thank you very much for all the interesting discussions at our booth and at your posters.

There is a new version of our SQUID electronics control software available. Download SQUIDViewer v3.3.0 from the customer area.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

There is a new version of our magnetic field fluctuation thermometer (MFFT) control software available. Download TempViewer v1.1.2 from the customer area.

You need a password to get access to the customer area. If you are a Magnicon customer and have no password, please contact us.

Magnicon introduces the high accuracy magnetic field fluctuation thermometer MFFT-1 for dilution refrigerators. Learn more at the MFFT-1 section of our web site.

Every Magnicon SQUID electronics now includes the Magnicon USB to RS-232 converter USBC-1.

Thank you very much for the great response and all the fruitful discussions at ULT 2008.

To improve our service and flexibility we now have opened a branch in Berlin. The office is located at premises of PTB Berlin with possible access to PTB infrastructure.

This gives us more flexibility for characterization and customization of our products as well as the possibility to be as close to current research as possible.

Additionally, we have increased our workforce to take our growing product range into account. Our new colleague is Dipl. Ing. Frank Ruede, an electrical engeneering technician with many years of experience in SQUID measurements, SQUID design, and SQUID system operation.

The address of our Berlin branch is:
Magnicon GbR
Division Berlin
Abbestr. 2-12
10587 Berlin
Germany

Phone: +49-30-34817958
Fax: +49-30-3481697958
E-Mail: ruede@magnicon.com

Thank you very much for the great response and fruitful discussions at our booth and during the poster sessions.

Please check our Jobs section for open positions!